Door Boot Gasket

Door Boot Gasket

Raymond from PA

Water leak

Screw driver, ratchet and driver bits

Bands to hold boot in place were somewhat difficult to reinstall. Several attempts on each band as they kept slipping off.

Door Boot Gasket

Brian from PA

Ripped door ganeesket

Torx bit, 1/4" drive socket set, cable ties (to use as handles to spread the springs), needle nose pliers (to spread the springs), and bad words.

I watched a video on you tube since there were no instructions. The hardest part was putting the retainer spring on the outside.

Door Boot Gasket

Ray from TX

Moldy gasket

Screwdriver, torx driver

Gasket was not difficult to replace once the panels are all removed. The difficulty is knowing how to release panels once screws are removed. Panels on this Bosch all needed to be pushed up slightly to release clips. Top had to be pushed rearward.