Part
Control Panel
Product Rating
Customer
Michael from PA
Problem
Display panel broke and kept getting weaker
Tools
Screwdriver with starbit
Repair & Advice
Removed screws on upper part of door. Removed cracked panel. Switched out handle and buttons. Reinstalled new one and screwed back together
Story submitted on November 29, 2022
Part
Control Panel
Product Rating
Customer
Joel from TX
Problem
Broken Control Panel.
Tools
Screwdriver, brain sweat.
Repair & Advice
Easy repair. Unscrew front panel unscrew control panel, replace push buttons and re-install everything. Easy, peasy.
Story submitted on August 24, 2020
Part
Control Panel
Product Rating
Customer
Ronald from NC
Problem
Old Control Panel broke. The plastic had weakened over the years at the stress point where the panel attaches to the door.
Tools
Just a screwdriver and assortment of bits.
Repair & Advice
It was quite easy. Had to take the front panel of the dishwasher door off to get to the attachment screws, which was straightforward once you find the screws on the inside edges of the door. And the buttons were a little awkward to extract from the old control panel and put back in the new control panel, but one we figured how to get the first one out/in it was pretty easy. The plastic part sort of snaps in to start, and then you finish the job with the screws.
Story submitted on September 5, 2020