Part
Circulation Pump
Product Rating
Customer
Donald from NJ
Problem
Circulator motor quit on dishwasher
Tools
6-star screwdriver is needed! screwdrivers, pliars
Repair & Advice
Take pictures (digital film is cheap!) of which screws go where, etc as you take it apart. You'll need a hose clamp (1.25 inches diam. or more), so get it before you start (I had to go to the hardware store twice for things I needed.) There is a hose that comes from the middle of the right side of the dishwasher and doesn't get plugged into anywhere at its far end: this took time to figure out.
Story submitted on September 29, 2015
Part
Circulation Pump
Product Rating
Customer
Randy from WA
Problem
Final rinse and clean was not happening.
Tools
Screw driver gun.
Repair & Advice
Everything went fine as the dishwasher access to the pump was easy.
Story submitted on December 22, 2020
Part
Circulation Pump
Product Rating
Customer
Richard from CA
Problem
Circulation Pump failed. Making loud noise and very little water jet spraying.
Tools
Star screwdriver, pliers, Phillips screwdriver, flat head screwdriver, wire cutter (to cut old hose clamp).
Repair & Advice
I followed, step-by-step, an online tutorial I found. Worked slowly. Had a friend help me lift dishwasher onto a portable work bench I brought into kitchen. Made it much easier working at eye-level and standing up.
Story submitted on September 11, 2020