Part
Latch
Product Rating
Customer
Hinkmond from CA
Problem
Door square holed latch was broken.
Tools
Philips head screw driver, flat head screwdriver, and pliers.
Repair & Advice
Unscrew mounting screws under cabinet. Slide out dishwasher from under cabinet. Keep door open. Using flat head screwdriver pry apart 2 metal flanges holding down old latch (on left and right sides), tilt and remove old latch, install new latch, then use pliers to bend metal flanges back into place. Test by closing and opening door. Slide back dishwasher into cabinet. Screw back in screws.
Story submitted on June 9, 2021
Part
Latch
Product Rating
Customer
Lisa from CT
Problem
Dishwasher door would not close in order to start washing cycle.
Tools
Screwdriver.
Repair & Advice
The door skin was removed and screws holding door togetherand latch assembly was disconnected and old latch was removed. New latch was installed and connected and latch assembly connected and door skin was replaced ed and screws were reinstalled
Story submitted on April 20, 2020