Part
Indicator Light
Product Rating
Customer
Kevin from NH
Problem
Cycle status light on front of door was not working.
Tools
Screwdriver
Repair & Advice
Straight forward - remove door screws, slide door front off, locate status light circuit board unplug old and plug in new. Only issue I had was that I didn’t ensure that the new board was securely seated before putting everything back together and the new board came loose such that status light was not visible. My bad - nothing to do with new part.
Story submitted on November 11, 2021
Part
Indicator Light
Product Rating
Customer
Edward from MD
Problem
KitchenAid dishwasher blue LED was out
Tools
Torx screwdriver, thin pry bar, thin double stick tape
Repair & Advice
Remove front panel screws; disconnect cables; gently pry off old circuit board; apply tape to the new board and fit it into position; reconnect cables and reattach the front panel. Several good videos on YT. I spent more time researching how to do the repair than actually doing it (and I'm totally fine with that!)
Story submitted on December 31, 2021