Part
Main Control Board
Product Rating
Customer
Richard from TX
Problem
Dishwasher had no power on front panel
Tools
Torx bit to take off front panel
Repair & Advice
YouTube show video on how to remove the board. There are a couple of tricks that you need to know the first time. You must slide board to the left to pull it off. You have to take the plastic clip off before you remove the cables. Check the thermal fuse for continuity. A lot of cable plugs to plug and unplug.
Story submitted on December 17, 2017
Part
Main Control Board
Product Rating
Customer
John from MI
Problem
Completely dead. Control board fried -- literally. Power connector melted.
Tools
Torq-head screwdriver driver (to remove and reinstall door panel) and lift spring clip retainer to slip old control module out of its mounting slot.
Repair & Advice
Very simple repair. It takes longer to remove and replace the door panel to get access to the control module than it does to replace the module. NOTE: The control module does not come with a Thermal Cut-Off (TCO) switch. Check your switch for continuity before ordering your replacement control module, since the TCO may have been damaged along with the control module (as mine was). This will save you time and trouble by ordering the TCO with the module if a continuity check reveals an open circuit.
Story submitted on June 14, 2023