Part
Water Inlet Valve
Product Rating
Customer
David from AL
Problem
Broken inlet valve
Tools
Screwdriver
Repair & Advice
Removed back of washer and replaced the inlet valve for the water.
Story submitted on December 28, 2018
Part
Water Inlet Valve
Product Rating
Customer
James from CA
Problem
Hot and cold water valve. Malfunction.
Tools
Crescent wrench and a Phillips head screw driver.
Repair & Advice
I had water pooling on the inside the tub of my washing machine. I tracked it to the hot and cold water valve assembly piece. It was easy to remove and replace through this website. When I receive the piece it was a genuine whirlpool part and very easy to install.
Story submitted on October 6, 2016
Part
Water Inlet Valve
Product Rating
Customer
Issa from TX
Problem
The washer leaks and water got out through the the drum the hot water inlet valve was broken
Tools
Screw driver pliers
Repair & Advice
I turn off the tow water supply valves
I used a screwdriver to loose 3 screws to open the top of my whirlpool wash machine
I used a plier to disconnect a small house that leads water from the water inlet valve to the wash machine and disconnected the tow electrical wires from the valve
I loosened the screw that hold the water inlet valve to the washer buddy
I installed the new water inlet valve tighten The screw
connected the pipe a
Connected the electric wires
Return the top cover tighten the 3 screws
Open the water supply
Story submitted on February 21, 2023