Part
Touchpad Switch Membrane
Product Rating
Customer
James from TX
Problem
Error code kept coming up about a stuck key
Tools
Screwdriver
Repair & Advice
Disconnect power. Remove upper wall behind range to acces the board. Remove board. And remove the housing for the membrane (the buttons). Remove the old membrane which is stuck on like a sticker. Replace with new one carefully aligning it. And reverse for installation.
Story submitted on February 6, 2018
Part
Touchpad Switch Membrane
Product Rating
Customer
Julie from WI
Problem
The buttons quit working after a self cleaning setting was used.
Tools
Phillips screwdriver
Repair & Advice
I unplugged the stove. I removed the panel. Removed the control board. Unplugged the number board from the control board. Unscrewed the number panel and peeled the old one off. Cleaned the old glue as best as I could. Aligned the new one. Removed the paper covering the adhesive and placed the number panel. Plugged in the number panel to the control board and screwed it in place. Replaced the back panel and plugged in the oven to test it. It worked great.
Story submitted on June 15, 2019
Part
Touchpad Switch Membrane
Product Rating
Customer
Perry from HI
Problem
Range and electronic controls were not working.
Tools
Screwdriver
Repair & Advice
Replaced the membrane and everything works like new!
Story submitted on November 8, 2019
Chat with us
Open tomorrow 9am-6pm CT
0
