- Heating Element Assembly
CustomerRobert from SC
Cordless drill with Phillips screwdriver bit.
Repair & Advice
Very easy repair. Unplug dryer. Remove hose from back of dryer. Remove small access panel at bottom back of dryer. Remove top of dryer. Remove top front plastic panel. Remove large front panel including door. Remove screw holing heater box in place. Unplug all electrical connectors from heater box. Pull heater box out from the rear access. Install new heater box and put dryer back together in reverse of disassembly. Plug in and ensure proper operation. Burning smell will go away after two or three uses.