Part
Check Valve Assembly
Product Rating
Customer
Ana Maria from NC
Problem
The dishwasher did not complete the cycle and stopped in the middle of the wash.
Tools
Screwdrivers, wrench, pliers.
Repair & Advice
Disconnect the electricity from the dishwasher and the water connection, disconnect the water pump that is located in the lower part of the washing machine, at the junction of the drain and the water pump there is a piece with a rubber by-pass valve (It is the part to be replaced) change the white part and put it back together.
Story submitted on January 29, 2021
Part
Check Valve Assembly
Product Rating
Customer
John from MD
Problem
Drain check valve failed
Tools
Screw drive and pliers
Repair & Advice
Watched several youtube videos to identify a drain problem. When I first removed the drain pump motor to check for blockage i found a dime sized rubber piece in the cavity of the pump. Watch a couple more videos and noticed the drain pump check valve that matched the piece that was found in the pump body. I was able to do the repair by pulling out the dishwasher, tipping back and proping the front with a 2x6.
It took longer to figure out the problem than to fix it
Story submitted on September 28, 2021
Part
Check Valve Assembly
Product Rating
Customer
Jason from CO
Problem
“OE” error. Found check valve flapper was torn. Removed flapper and “AE” error occurred. Replaced check valve and no more issues.
Tools
Channel lock pliers, screw driver, wrench
Repair & Advice
“OE” error. Found check valve flapper was torn. Removed flapper and “AE” error occurred. Replaced check valve and no more issues.
Story submitted on March 8, 2022