Part
Pressure Switch
Product Rating
Customer
Donald from PA
Problem
Error code i20 showed up repeatedly.
Tools
Screwdrivers and pliers.
Repair & Advice
Turned off power at the circuit breaker and shut off the water. Disconnected electrical and water connections. Slid dishwasher out from the cabinet. Lifted insulation on left side of unit to locate pressure switch. Drained water from drain cavity. Removed hose and electrical connector from the pressure switch, then released the lock and removed the switch. Inserted new switch and reversed removal steps. The operation is normal with no error codes.
Story submitted on October 12, 2020
Part
Pressure Switch
Product Rating
Customer
Doug from PA
Problem
Dishwasher threw an 02 code and would not complete a cycle
Tools
Only a phillips screwdriver.
Repair & Advice
This fridgidare dishwasher has had this ongoing problem since I have had it. About 8 years. This is the third pressure switch I replaced. And yes I do have the Fridgidare fix ( an air dam) in it since new. Works fine for about 2 years. And the switch when it goes bad does not have food or grease in the switch. It is perfectly clean. Part was here in 2 days. Great service!
Story submitted on November 12, 2022
Part
Pressure Switch
Product Rating
Customer
Jusitn from IL
Problem
I20 error code
Tools
Screwdriver
Repair & Advice
Constant i20 error code on fridgidaire dishwasher. This fixes it.
Story submitted on February 17, 2023