Part
Door Spring Link
Product Rating
Customer
Mark from MN
Problem
Door spring link broke.
Tools
Phillips screwdriver, wrench (to disconnect water line to slide the dishwasher out).
Repair & Advice
1. Turn off circuit breaker to dishwasher. 2. Open dishwasher door and remove screws fastening dishwasher to countertop. 3. Remove kick plate. 4. Adjust front feet in order to lower front top of dishwasher. 5. Disconnect water line. 6. Pull dishwasher forward in order to access door spring. 7. Install new door spring link as a mirror image to the opposite door spring link. Make sure to connect spring on the same hook on the door as the opposite side. Test door operation. 8. Perform preceding steps in reverse to put back together.
Story submitted on March 7, 2019
Part
Door Spring Link
Product Rating
Customer
Jim from MD
Problem
The door spring plastic link broke after 18 years, it was tired.
Tools
Fingers and Phillips screw driver to loosen screw allowing me to pull dishwasher.
Repair & Advice
Just pull dishwasher out and install link.
Story submitted on December 29, 2020