Part
Feed Tube Assembly
Product Rating
Customer
Rafel from TX
Problem
Feed tube looses ability to seal adequately over time.
Tools
Screwdriver
Repair & Advice
Pressure loss due to wearing sealing surfaces. Much better and cleaner.
Story submitted on July 15, 2023
Part
Feed Tube Assembly
Product Rating
Customer
Tony from MD
Problem
Food particles left on the dishes
Tools
Screwdriver and my brain, not in that order.
Repair & Advice
Food particles on the dishes persisted even after several repair visits and replacements of other parts. But simply removing the racks and looking at the back of the dishwasher, I could see that one of the two valve flaps on the water supply was permanently open. The other valve was engaged by the upper position of the middle rack, leaving the open valve to dribble water and cut pressure. So when food was cleaned perfectly after we lowered the rack, thus accessing the defectively open valve, the solution was clear: replace the water supply tube. That worked.
Story submitted on November 10, 2021
Part
Feed Tube Assembly
Product Rating
Customer
Christopher from WI
Problem
Would not properly clean upper shelf or knife tray.
Tools
Screw & star driver.
Repair & Advice
Disconnected upper shelf and knife tray then removed them and lower tray. Loosen center hub on bottom and pulled out old tube and replaced with new tube snapped everything back in place now washes as good as new.
Story submitted on June 10, 2020