Part
Touchpad Control Panel (Black)
Product Rating
Customer
Michael from IA
Problem
Started getting beeping sound and unresponsive touchpad
Tools
Nut driver and screw driver
Repair & Advice
Very simple repair. turn off power to stove. 4 colored philips head screws (2 on each side), 4 screws to release burners from the front panel, 4 screws below the panel. I did unscrew the 8 chrome screws under the burner pods. Probably could have left the rear 4 in, but it seemed to help removing the front panel. It does require some slight maneuvering and twisting to get the panel out. Once out, you can unhook the ribbon from the board. 4 screws remove the board from the front panel. switch panels, reattach control board, hook up ribbon (make sure you lock the ribbon), reinstall panel to stove, and reinstall screws.
Story submitted on October 4, 2016
Part
Touchpad Control Panel (Black)
Product Rating
Customer
AARON from RI
Problem
Oven keypad issue
Tools
Screw driver
Repair & Advice
I bought the replacement part to my jenn-air oven tried to repair the control panel key pad by checking contacts. when I found out that was not the fix, I replaced it with a new part very easily and all is like new
Story submitted on May 6, 2022
Part
Touchpad Control Panel (Black)
Product Rating
Customer
Tyrone from WI
Problem
Touch pad was inop
Tools
Screwdrivers
Repair & Advice
Easy job if you get all the screws out. Putting the wire board into the control unit was a bit tricky but with an extra set of hands no problem
Story submitted on April 2, 2024