Part
Dryer Maintenance Kit
Product Rating
Customer
Michael from NM
Problem
Damaged felt seals and glides.
Tools
Screwdriver, wood chisel
Repair & Advice
I watched a youtube video and the repair was pretty simple. A wood chisel worked much better than a putty knife to remove the old felt adhesive. The base of the ball plate is pretty thick for sheet metal screws. I broke the tips off of two phillips screwdrivers installing the three screws. This kit is a lot cheaper than just buying the individual parts and includes additional parts that may as well be installed while the dryer is apart.
Story submitted on September 30, 2022
Part
Dryer Maintenance Kit
Product Rating
Customer
Daniel from NY
Problem
Dryer tumbler became noisy and quit turning.
Tools
Square drive screwdriver, pliers, scraper, air sander, shop vacuum.
Repair & Advice
This is a perfect kit to prolong the life of your dryer. Give yourself some room to work. The instructions are spot on. I found having the dryer on it's back made tumbler removal easier. (use the old screws from the rear ball bracket to run in the new one to cut threads first) There will be less chance of burring the new screws on final assembly. Be generous with supplied lubrication on the ball socket. All the parts were an exact fit.
Story submitted on February 5, 2018
Part
Dryer Maintenance Kit
Product Rating
Customer
GARY from NC
Problem
Dryer belt was slipping and causing irregular noise and causing unit to over heat and trip motor overload
Tools
#2 philips screw driver , drill driver, alignment wire , vacuum cleaner , and helper
Repair & Advice
follow and don't over think directions take all time necessary to do steps in order
Story submitted on February 19, 2022