Part
Door Assembly (Black)
Product Rating
Customer
Warren from WI
Problem
Door handle broken
Tools
Small putty knife
Repair & Advice
Cheaper to buy entire door than handle.
NO instructions, However repair is easy. Separate back door frame nearest door hinge with 2" or smaller putty knife. Be careful not to pull to hard and break plastic frame cover plate. Recommend only separating back frame top half and side of jam were hinge is needed to expose. Slide microwave door pin into hinge on microwave. Push frame back on door were you separated and your done.
Story submitted on November 11, 2015
Part
Door Assembly (Black)
Product Rating
Customer
Tammy from LA
Problem
Microwave door was broken.
Tools
Phillips screwdriver and putty knife
Repair & Advice
First you have to remove the grill on the top and the lift the door from am open posistion and it will come right off. In order to put the door back on i had to remove the inner frame so i can put the top part on the fitting. The bottom part goes on after
Story submitted on April 15, 2016
Part
Door Assembly (Black)
Product Rating
Customer
mike from FL
Problem
Broken handle on microwave door, again.
Tools
Flathead screwdriver
Repair & Advice
Pry out/snap off small plastic piece covering upper hinge on inside of door, lift door off bottom hinge. Pry the interior trim on the new door (rectangular, surrounding glass on inside) off with screwdriver, carefully, it snaps in or out of place, will crack with too much force; I broke mine but snapped it back in, works fine, so far.
Story submitted on December 16, 2016