Part
Oven Control Board
Product Rating
Customer
Jasmine from AR
Problem
F10 code.
Tools
Screwdriver.
Repair & Advice
Oven wouldn’t stop flashing the F 10 code. Tried changing the temperature sensor. Didn’t work. Bought this part. Unscrewed the old one and popped this one on it. Good as new.
Story submitted on September 16, 2020
Part
Oven Control Board
Product Rating
Customer
Christopher from MI
Problem
F10 error.
Tools
#2 square driver.
Repair & Advice
I suggest testing the temp probe first but i did read that the boards on that range often go bad.
Disconnect power sources (mine has electric & gas).
Note: I did not disconnect gas line. It didn't did anything. But I do not recommend that any one do that
Take out screws to remove top service panel.
Unplug power and control lead from the board.
Unscrew the 4 mounting screws from control board modual.
Note: my oem board had the labled cover and buttons and the new one was just blanc with open buttons so i jad to remove the two boards from the old and insert the new board from the wrong case.
It works just the same!
Story submitted on November 17, 2020
Part
Oven Control Board
Product Rating
Customer
Jason from MD
Problem
Error code was F33 I think. Details of fault in the description.
Tools
Screwdriver, phillips and square bits.
Repair & Advice
Oven was shutting off intermittently when trying to use multiple functions (stove top burners and oven). Thermometer had previously been replaced for the same issue but did not fix the issue completely. Installation was very easy, took about 15 mins. Be aware that the plastic panel that covers the buttons will be glued to your old head unit, so you either need to order a new one with the new unit, or use a hair dryer or heat gun to transfer the old one.
Story submitted on January 13, 2021