Samsung Blinking Dash/Line Error Code List
Samsung refrigerators will start to blink a Dash or Line on the display when they there is an error code. For example, if #12 in the diagram below was blinking then the computer thinks that there is a problem with the condenser fan motor. Keep in mind that error codes are a starting point, and replacing the part related to the problem does not always fix the problem. There can be a problem with the stated part, wiring, main PCB control board, and sometimes even an un-related part. If you are unsure you should hire a technician to properly diagnose the problem.
(Click Diagram To Enlarge)
1: Ice maker sensor -Ice Maker sensor connector missing, contact failure, electric wire cut, short-circuit, Ice Maker sensor failure, and so on. Indicates an error when the temperature sensed by Ice Maker sensor is higher than 150℉ or lower than –58℉.
2: Refrigerator Sensor – Refrigerator sensor connector missing; contact failure, electric wire cut, short- circuit, Refrigerator sensor itself failure; and so on. Indicate Error when the temperature sensed by Refrigerator sensor is higher than 150℉or lower than –58℉.
3: Refrigerator Defrost Sensor – Refrigerator evaporator internal defrosting sensor connector missing, contact failure, electric wire cut, short-circuit, sensor itself failure; and so on. Indicate Error when the temperature sensed by Refrigerator defrosting sensor is higher than 150℉or lower than –58℉.
4: Refrigerator Fan Error – Refrigerator Fan motor operation failure, feedback signal line contact failed, electric wire cut, short- circuit, and so on. Indicates an error if the F and G signals generated by the FAN-motor operation are not input.
5: Ice Maker Function Error – Ice-ejector and level failed three times or more
6: CoolSelect Zone Sensor – CoolSelect ZoneTM sensor connector missing, contact failed, electric wire cut, short-circuit, CoolSelect ZoneTM sensor itself failed, and so on. Indicates an error when the temperature sensed by CoolSelect ZoneTM sensor is higher than 150℉or lower than –58℉.
7: Refrigerator Defrost Error – In the refrigerator room, if frost removal mode is finished due to limited time of 80 minutes. Error is displayed.
8: Exit-Sensor – Air sensor connector missing; contact failure, electric wire cut, short-circuit, open air sensor itself failure, and so on. Indicates an Error when the temperature sensed by the open air sensor is higher than 150℉or lower than –58℉.
9: Freezer Sensor – Freezer sensor connector missing, contact failed, electric wire cut, short-circuit, Freezer Room sensor itself failure. Indicate Error when the temperature sensed by Freezer sensor is higher than 150℉ or lower than –58℉.
10: Freezer Defrost Error – Freezer evaporator defrosting sensor connector missing, contact failed, electric wire cut, short- circuit, sensor itself failure, and so on. Indicates an error when the temperature sensed by Freezer defrosting sensor is higher than 150℉or lower than –58℉.
11: Freezer Fan Error – Freezer Fan motor operation failure, feedback signal line contact failure, motor’s electric wire missing, and so on. Indicate Error if the F and G signals generated by the FAN-motor operation are not input.
12: Condensor Fan Error – Condenser Fan motor operation failure, feedback signal line contact failure, motor’s electric wire missing, and so on. Indicates an error if the F and G signals generated by the FAN- motor operation are not input.
13: Freezer Defrost Error – In the freezer room, if frost removal mode is finished due to limited time of 70 minutes. Error is displayed.